Audi RS5 B10 Wheels: FF-THREE 10.5x21 for Avant & Saloon – with Gutachten
08.10.2026 · SIXNINE WHEELS
Looking for wheels for your new Audi RS5 B10? With the SIXNINE FF-THREE 10.5x21 we have developed a wheel that is precisely tailored to the new RS5 generation – for the RS5 Avant and the RS5 saloon. With Gutachten, for your OEM tyres and with clearance from stock suspension to lowered setups.
The FF-THREE 10.5x21 for the RS5 B10 at a glance
- Size: 10.5x21 inch
- Offset: ET X – vehicle-specific, tailored to the RS5 B10
- PCD: 5x112
- Centre bore: 66.6 mm – fits without hub rings
- Load rating: 850 kg
- Concave: 110 mm
- Gutachten: yes, for RS5 B10 Avant and saloon
- Tyres: OEM tyres can be reused
- Finishes: GlossyBlack, HyperSilver, LiquidMetal
- Delivery: March 2027
View the FF-THREE for the RS5 B10 →
Why a dedicated wheel for the RS5 B10?
The new RS5 generation is wider and heavier than its predecessor. Off-the-shelf aftermarket wheels are therefore often a compromise – in load rating, offset or looks. So instead of just “making the FF-THREE fit”, we designed it specifically for the RS5 B10: size, offset, centre bore and an 850 kg load rating are precisely matched to the car.
The result: a perfect fit in the wheel arch and a stance that makes the most of the new RS5’s width.
Fits RS5 Avant and RS5 saloon
Whether you drive the RS5 B10 Avant or the RS5 B10 saloon – the FF-THREE 10.5x21 is developed for both body styles and both are covered by the Gutachten.
Keep your OEM tyres
A big advantage: you can keep using the OEM tyres of your RS5 B10. No new tyres, no special sizes – simply have your tyres mounted on the new wheels.
Clearance: stock, springs or coilovers
The FF-THREE clears at a wide range of ride heights. That means it works:
- on a stock RS5 B10 without lowering,
- with lowering springs,
- with coilovers.
So you can start at stock height today and lower the car later – without having to change wheels.
Maximum concave – 110 mm
The FF-THREE stands for maximum concave. Even in the RS5 special size it delivers 110 mm of concave depth – with full strength and drivability. An extremely dynamic look that sets your RS5 apart.
One wheel – multiple designs
With the optional inlay designs you can change the look of your FF-THREE at any time. Bolts in special colours are also available. As standard, the wheel comes with high-quality stainless steel bolts in a chrome finish.
With Gutachten
The FF-THREE 10.5x21 for the RS5 B10 has a Gutachten for Avant and saloon.
Pre-order and save 10 %
The RS5 special edition launches as a pre-order: order now and get a 10 % pre-order discount. Delivery is planned for March 2027 – just in time for the season.
Pre-order the FF-THREE for the RS5 B10 now →
FAQ: wheels for the Audi RS5 B10
Which wheel size fits the Audi RS5 B10?
The SIXNINE FF-THREE in 10.5x21 with vehicle-specific offset, PCD 5x112 and 66.6 mm centre bore is developed specifically for the RS5 B10.
Do the wheels have a Gutachten for the RS5 B10?
Yes. The FF-THREE 10.5x21 has a Gutachten for the RS5 B10 Avant and the RS5 B10 saloon.
Can I keep my OEM tyres?
Yes, the RS5 B10’s OEM tyres can be used on the FF-THREE.
Do the wheels fit a lowered car?
Yes. The FF-THREE clears at various ride heights – stock, with springs or with coilovers.
When will the wheels be delivered?
Delivery is planned for March 2027. Pre-order now and save 10 %.
Which finishes are available?
The FF-THREE for the RS5 B10 is available in GlossyBlack, HyperSilver and LiquidMetal.
What is the load rating?
The FF-THREE 10.5x21 for the RS5 B10 has a load rating of 850 kg per wheel.
Questions about your setup? Check the SIXNINE FitmentFinder or get in touch.